Let TI and MathWorks help you launch your next motor control design - in cooperation with Digi-Key

In this webinar, learn how you can quickly design a new motor control system using Embedded Coder® from MathWorks and the C2000™ family of microcontrollers from Texas Instruments. We walk through a demo of Simulink running two three-phase motors simultaneously using the F28069M LaunchPad™ development kit.

TI’s C2000™ MCUs have been focused on easing motor control design for over 20 years. From the older C24x DSP engine to the latest C28x floating-point DSP, C2000 MCUs provide a range of processing performance from 60 MHz to dual-core 200 MHz CPUs as well as analog and control peripherals necessary for premiere control systems. Along with the unique hardware solutions, C2000 MCUs also include the InstaSPIN-FOC™ and InstaSPIN-Motion™ software solutions, which ease three-phase motor design.

MathWorks provides software that enables modeling, simulation, and code generation of control systems using Simulink® and Embedded Coder®. Embedded Coder support for TI’s C2000 family of microcontrollers includes automated build and execution, processor-optimized code including DMC and IQMath libraries, and the ability to perform processor-in-the-loop (PIL) tests with execution profiling.

Speakers

  • Matthew Pate -TI C2000™ MCUs Product Marketing. Matthew has been with Texas Instruments for over 16 years, and the C2000 MCU Business for 13 of those.  Involved in aspects of both HW and SW architecture and validation of the C2000 product lines during his career, Matthew is excited to help customers succeed with C2000 in their system.
  • Brian McKay – Embedded Systems Technical Marketing Manager. Brian McKay manages MathWorks solutions for embedded systems customers featuring TI hardware. Brian has been building customer solutions that combine MathWorks software with embedded hardware for over 10 years.
  • Antonin Ancelle - Embedded Targets Development Manager. Antonin Ancelle leads the embedded targets development at MathWorks for TI hardware platforms and many others. With a decade of experience developing and working with MathWorks tools, Antonin is passionate about sharing his technical knowledge with embedded engineers.


 


Related


Is the Universal Translator Finally Here?

This webinar from NXP will provide a detailed insight on why these advanced, extremely-low power translators from NXP Logic are the solution for your mixed voltage applications! Today's modern,...

Driving lower power for MCU products even lower

The MSP430 microcontroller family from Texas Instruments prides itself on extremely low power consumption. However, their flagship power consumption is contingent upon various properties like supply...


Q&A about SuperTest for compiler users

Compilers are extremely complex programs with many options. A compiler error can break an application in unexpected ways that may be hard to debug. Even if the compiler supplier has tested the com...

New connectivity protocols for small IoT devices

The most popular of the new connectivity protocols for small IoT devices are MQTT, CoAP, LWM2M and 6LoWPAN. This article gives some information on each of these, and a comparison of their differen...

General principles of PCBs design

How to design PCBs correctly, to reach boards which are cost-effective to produce and to populate? Which are the most important PCB design principles? What about production technology of PCB? We have ...

The Next Level of Embedded Software Development

With the rapid expansion of complex technology into everyday life, the importance of software is growing exponentially. This complimentary webinar presented by Siemens PLM Software will show how emb...

Turning Signal Integrity Simulation Inside Out

What does it mean to turn signal integrity simulation inside out? - ANSYS is pursuing a strategy in which electromagnetic simulation is primary and circuit analysis supports the electromagnetic soluti...

 


WSI's OLED Professional innovations create more value for You.

WSI are the PMOLED manufacturer and our factory located in Chun-Nan in Taiwan. Our products are the market leader and pioneer in PMOLED module, including the monochrome, area colors and full color one...


SKIPPER UBT21 - a Bluetooth 4.0 USB serial adapter for industrial and medical use

SKIPPER UBT21 is a Bluetooth 4.0 USB serial adapter for industrial and medical use. It incorporates a Bluetooth Dual-Mode Stack, supports ranges of up to 300 meters and transferrates of 720 kbit/s (ne...


Three of a kind - Versatility based on Low Power ARM Cortex-A15

At this year's Embedded World, MEN has presented three low power, ARM Cortex-A15-based solutions on different form factors: a VMEbus SBC, an industrial box PC and a COM Express Mini module. All so...


Enabling Embedded IoT

Eurotech, a long-time leading provider of embedded systems and a global leader in IoT enablement, showed its new modules and Multi-service IoT Gateways at Embedded World 2017. The newly introduced Eu...


PLS’ UDE and new UAD2next allow more powerful trace analysis of embedded multicore systems

The new Universal Debug Engine 4.8 from PLS Development Tools offers a bunch of new and improved features for trace analysis of embedded multicore systems. With the new access device UAD2next PLS cont...


Disruptive technologies

Rahman Jamal, Global Technology & Marketing Director, National Instruments, talks about disruptive technologies in the consumer world, but also in measurement, automation, and the embedded industr...


AdaCore Announces Availability of QGen Debugger at Embedded World 2017

Jose Ruiz, technical lead at AdaCore for the company's QGen automatic code generator toolset for model-based development, discusses that product and explains what differentiates it from other prod...


SECO IoT roadmap: from the proof of concept to the market

During Embedded World 2017 Gianluca Venere, SECO Director of Global Sales, leads us to discover the company's Industrial IoT roadmap showcased at SECO's main booth, along with the latest UDOO ...


Internet of Chocolate

HCC show off an embedded chocolate vending machine using MQTT to connect to a broker in the cloud. There is an important message behind this cool demo – security and reliability of embedded soft...