Video bridging use cases based on CrossLink programmable ASSPs

CrossLink is an innovative video bridging solution which helps designers to take advantage of the latest generation of processors, displays and sensors. CrossLink defines a new class of programmable application specific standard product that combines the flexibility and fast time-to-market of a FPGA with the power and functional optimization of an ASSP.

This White Paper describes five new applications for Crosslink, underscoring the device’s flexibility to support the fast evolving video bridging market. The first three represent an emphasis on new video bridging solutions. The last two are traditional interface conversion applications.

 

 


 


Related


Ultra-Low Voltage 8Mb Serial NOR Flash Memory

Winbond’s ultra-low voltage serial NOR Flash memory can work between 1.14V to 1.60V, which covers most of the single AA battery operation voltage range.  The lower Vcc can reduce the power ...

Is the Universal Translator Finally Here?

This webinar from NXP will provide a detailed insight on why these advanced, extremely-low power translators from NXP Logic are the solution for your mixed voltage applications! Today's modern,...

Driving lower power for MCU products even lower

The MSP430 microcontroller family from Texas Instruments prides itself on extremely low power consumption. However, their flagship power consumption is contingent upon various properties like supply...


Common and differential mode noise AC filtering

Almost every design engineer today get challenged by the demand for miniaturization to reduce space, weight and overall size. Within external and internal power supplies working with 230VAC noise filt...

The Next Generation Touch Technology Experience

Projected Capacitive Touchscreen Technology (“PCT” or “PCAP”) is the most advanced touch solution available today. However, such high-grade technology comes at a significant co...

 


ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...