Loading
  • Designer´s Column

    DESIGNER'S COLUMN

    Dual-channel colorimeter with programmable gain transimpedance amplifiers and synchronous detectors
    This “Circuits from the Lab” paper introduces a dual-channel colorimeter with programmable gain transimpedance amplifiers and synchronous detectors that measures the ratio of light absorbed by the sample and reference containers at three different wavelengths.

    Solutions for Sensing Applications
    During this webinar, participants will receive an overview on different sensor applications and TI solutions to support them. Through various concrete examples the session will detail the sensing principles and the main design challenges involved.

    Benchmarking of in-memory & on-disk databases
    Will an IMDS (in-memory database system) with transaction logging outperform a traditional DBMS? Will type of storage – hard disk drive vs. SSD vs. state-of-the-art memory-tier device – affect any performance difference? McObject’s benchmark report answers these questions.

    Computer systems for railway applications
    More and more electronic systems are being built into trains, the underground, streetcars and buses. If you talk about the overall railway engineering market, you don’t only mean vehicles – in which areas and applications can one find these computers and which functions do they take over? And why are they so different to the office PC or the one at home?

    CompactPCI Serial
    As you can see in our free Virtual Seminar, CompactPCI® Serial can be used from simple industrial PCs to clustered, redundant high-end systems, from harsh environments till safety critical, supporting Ethernet, USB, SATA and PCI Express in parallel.

    Isolated interface solutions for industrial sensor and monitoring applications
    This webinar reviews designs in which isolation is needed to protect personnel and equipment from harsh electrical environments. Presentation will detail interface power requirements and approaches for achieving design objectives.

    It’s all about ARM
    We have put together for you a selection of 5 new webinars which cover following topics: “FPGA fabric and Cortex-A9 on the same chip”, “smallest ARM-based microcontroller”, “8-bit price for 32-bit power”, “the next milestone of the mbed project” and “overview about Infineon XMC Kits”.

    Efficient remote management for embedded platforms
    Out of Band (OOB) remote management can help to optimize the total cost of ownership of distributed embedded platforms. However, existing implementations are normally too costly for embedded systems applications.

    Intelligent device platform for M2M applications

    Connecting a device to the cloud means to focus on three main issues: security, manageability, connectivity. Listen into how Wind River contributes to successfully develop devices for M2M applications.

    Reloadable user interfaces with EB GUIDE and HTML5
    The focus of this webinar is on the latest advancements in infotainment and whether HTML5 is the right solution to the infotainment technology.

    Smart Grid
    The promise of the smart grid is a more efficient, reliable, flexible and safe energy distribution system. But there are many challenges too. This Virtual Seminar provides technical presentations and white papers about solutions which can help to solve the challenges of the Smart Grid.


  • Magazines Promo neu beide

    Latest issues of B&S and ECE Magazine

    ECE Magazine

    Cover Story:
    Motor Control with Arduino: A Case Study in Data-Driven Modeling and Control Design

    Download now

    B&S Magazine

    Cover Story:
    NEW STANDARDS – MORE SERVICES: SMARC & CompactPCI® Serial from Kontron

    Download now

Articles & White Papers
article
Try to convince someone with arguments. It won’t work. It won’t work because we do not believe in arguments, we believe in people.

article
With about €100 million public funding the EU and at least a €100 million contribution from industry and research organisations, the ARTEMIS Joint Undertaking has published its Call 2010 for R&D proposals.

article
An interview with Steve Sciarappo, General Manager, Intel Embedded and Communications Group, Marketing and Business Operations, on Intel's latest embedded products and shortening time-to-market through solutions from the Intel Embedded Alliance.
article
The rugged industrial-grade EPI bus is much more suitable for industrial PC applications than the PICMG PCI/ISA bus in terms of cost-performance, physical compatibility, software and hardware compatibility, signal integrity, EMC, environment adaptab...

article
This article introduces a new embedded PC family based on the latest Intel Core i7 processor and the QM57 platform controller hub (PCH).

article
Floating point processors are essential in military digital signal processing (DSP) systems. The evolving series of Power Architecture processors with AltiVec Instruction Set Architecture have long taken the lion’s share of the aerospace and defen...

article
This article describes the evolution of the PC/104 form factor and its advantages in applications which require high performance, low power and small form factor.

article
This article focuses on the integration of LCD panels with embedded x86 boards consisting of a Computer-on-Module (COM) mounted on a carrier baseboard. The COM products can be based on different standards such as COM Express, ETX and QSeven.
article
This article describes the PC/104 form factor CPU board and a type 2 COM Express CPU module based on the Intel Luna Pier and Luna Pier Refresh platforms.

article
Vehicle computing platforms are systems for mobile applications in the harsh environments of the traffic and transportation sectors. The ideal platform should be specifically designed to meet these requirements and not just be a ruggedized office-ba...

article
This article describes in detail the advances of the ESMexpress standard, which extends the COM concept into ruggedized applications.

article
A year ago Kontron launched Concept Box, a custom design service for individual Box PCs. Today it has already resulted in three standard products, making up the new CB series. Thus the boundaries between customized Box PCs and standard products are ...

article
With the new 2010 Intel Core i7, i5 and i3 processors and associated products only just revealed, embedded board manufacturers have already introduced the first embedded computer products based on this new processor core family.

article
Using SBC modules is one solution to minimize cost and risk over the product lifecycle, but gives customers a make or buy dilemma. Licence SBC modules may resolve this while preserving the benefits of using SBC modules. This article describes the fi...

article
OpenVPX expands on the VPX Base and Dot Specifications and provides a System Specification to address interoperability issues between VPX modules and Chassis. OpenVPX is an extensible specification which addresses the current and future needs for co...

article
Counterfeit materials will continue to challenge the defensive capabilities of manufacturers in the military and aerospace industry. With obsolescence and supply chain management, combined with thorough inspection, testing and quality assurance proc...

article
Building a slimline or thinline embedded system can be a difficult task or a relatively simple one depending on the form factor chosen for the task. But how slim is slim enough?

article
Combining the field bus EtherCAT with the computing architecture MicroTCA enables new ideas for improving existing industrial automation solutions applications and will even pave the way to a completely new range of applications.

article
Normally people think that off-the-shelf Qseven modules are not robust enough for applications in harsh environments. Such as outdoor applications.

article
The new layer 2 failover feature provides networks with the ability to rapidly replace failed links – far faster than ICMP monitoring via IPMP and NIC Bonding in Linux, and far easier to configure as well.



Page 10 of 15

GE Developers Conference - June 13 in Munich

This years GE Developers Conference will focus on the Internet of Things and the role of embedded technology. The conference is designed by developers for developers where industry experts discuss and present the latest developments in the fields of embedded CPU tech­nology, connectivity and security.


ARM-based Embedded System Design 2013

ARM-based systems are rapidly gaining popularity in the Embedded Market. This one-day conference with table-top exhibition aims to provide a comprehensive overview about new products, technologies and strategies for ARM-based Embedded System Design.


Requirements Management Roadshow

Establishing a requirements process and the right tool selection are quite often a major challenge. Visit Visure's Requirements Management Roadshow  and learn what's really helpful for our daily project work and which tool is the right one for your needs?


 ti-workbench promo

Welcome to the TI workbench experience.

Learn more about hot TI topics and cool technology solutions at our hands-on demo presentations.



  • Virtual Conferences

    VIRTUAL CONFERENCES


    Software Development & RTOS
    This free Virtual Conference has its focus on software and tools for embedded systems development. Amongst others, topics like programming of multicore system, graphical system design, RTOS and Middleware for ARM Cortex-M, Android security for embedded devices, Ada 2012 and MISRA-C:2012 are covered.

    Microcontrollers & Tools
    “Low power” and “ARM-based” are still hot topics in the MCU market, as you will see in this free Virtual Conference about Microcontrollers & Development Tools.

    Power Management & Efficiency
    This Virtual Conference provides technical webinars and video interviews about integrated galvanic isolation for industrial control applications, total power conversion solutions, KNX transceiver for home and building automation, power supplies for embedded applications and more.

    Embedded Systems Design
    The focus of this Virtual Conference is on software, hardware and tools for modern embedded systems design. Amongst others, the conference programme covers technical presentations about model-based design, mixed-signal design and verification, ARM-based SoC FPGAs, industrial communications, hardwired TCP/IP chips and modules, multi-board system development.

    Machine-to-Machine Communications
    Today, there are more internet devices than there are people in the world. Therefore the Internet of Things is one of the hot topics of our Virtual Seminar about Machine-to-Machine communications. Other topics include data protection, Cloud-based embedded computing, M2M with UMTS and HSDPA and more.

    Embedded Computing
    The use of Open Standards has become one of the drivers of the embedded computing market. Our Virtual Conference informs about latest developments with Small Form Factor Boards, CompactPCI, ATCA/MTCA and VME/VPX

    Motor Control
    Motors are still one of the main consumer of electricity in industry. A lot of energy can be saved by running electrical motors at optimal performance and with optimal energy-efficiency. Our Virtual Conference provides you with technical information about smart motor control concepts, products and technologies.

    Real-Time Operating Systems
    Multi-core, Safety & Security and Virtualization are major topics of our Real-time Operating Systems Virtual Seminar – a collection of free webinars and technical articles.

    ARM-based Embedded Computing
    ARM processors increasingly penetrate into areas that were previously dominated by x86 processors. Especially in the market for embedded computing boards and modules lots of new ARM-based products have been announced recently, as you can see in our free virtual conference.

    Software Development
    This Virtual Seminar provides a couple of webinars in which you can learn how to accelerate your next development project, how to develop highly-reliable, safe and secure software and new ways to make software development safe and easy and more...